Product Description
Product information:"Dry Training Buffer Walther SSP"
The Walther SSP .22 LR dry training buffer is designed to protect your pistol's chamber from damage during dry fire practice. By limiting the travel of the striker spring, it prevents the rimfire striker from making contact with the chamber face.
Step-by-Step Installation
- Locate the Screws: Look at the front face of the pistol, directly below the barrel. You will see two screws.
- Remove the Correct Screw: From a front-facing perspective, locate and remove the screw on the lower right. This housing contains the striker spring.
- Install the Buffer: Screw the dry training buffer directly into this newly opened thread.
How It Works
- Restricts Movement: The buffer prevents the striker spring from decompressing completely.
- Chamber Protection: Because the spring cannot fully decompress, the rimfire striker is blocked from moving all the way forward, eliminating the risk of it striking and damaging the chamber edge.
- Unlimited Practice: Once installed, you can dry fire your Walther SSP as often as needed for safe, effective training.
